Eldrafto

By eldrafto

0+ active installationsVersion 1.11.1

Publish AI-generated content from the Eldrafto content service straight to WordPress, as Elementor layouts or Gutenberg blocks.

Description

Eldrafto connects your WordPress site to the Eldrafto content service (https://eldrafto.com), a third-party AI service that researches a topic, generates the content, and sends it to your site to be published as an Elementor layout or as Gutenberg blocks.

This plugin is the WordPress-side receiver. It exposes a small REST API that the Eldrafto service calls with its secret token to:

  • create and update draft or published posts,
  • build native Elementor container layouts (or fall back to Gutenberg blocks when Elementor is not installed),
  • report a post’s status and Elementor state back to your Eldrafto account,
  • add a machine-readable AI provenance statement to the pages it creates.

You stay in control: in manual mode the service saves a draft and stops so you can review and publish it yourself; in auto mode it publishes immediately.

AI provenance marking

Pages created by this plugin carry a small, signed JSON-LD statement in the page head declaring that the content was generated by AI, using the IPTC digitalSourceType vocabulary. The statement itself is invisible to readers and exists so the content stays identifiable as AI-generated. Pages that Eldrafto publishes without human review additionally carry a small visible “AI-generated” label at the top of the content. A page that also holds your own text, for example an element kept as it is when you import a template, says “Contains AI-generated content” instead; site owners can restyle it via the eldrafto_ai_disclosure_text filter or remove it via eldrafto_ai_disclosure_enabled. This is required of the Eldrafto service by Article 50 of the EU AI Act (Regulation (EU) 2024/1689).

A page that Eldrafto published before plugin 1.5.0 shows the label too, also a page that you reviewed, because nothing on the site tells the two apart. Remove the label from such a page with the eldrafto_ai_disclosure_enabled filter.

It is added only to posts this plugin created.

Page direction and language

A page that Eldrafto publishes from a template shows in the direction of its own language, on a site in any language. For example, a Hebrew page shows right to left on an English-language site. The plugin marks the page content with its direction and language, for the browser and for screen readers. The theme header and footer and the “AI-generated” label stay in the site direction.

On such a page, the arrow keys of the tabs and the nested accordion also follow the page.

This applies to pages that Eldrafto publishes with version 1.8.0 or later. A page from an earlier version does not change until Eldrafto publishes it again, for example after you ask for a revision. To publish pages in the site direction, return false from the eldrafto_content_direction_enabled filter. The language mark stays, and pages that Eldrafto published before keep their direction until it publishes them again.

Background image URLs

Elementor drops a background image when its URL holds an ampersand in the HTML-encoded form. So when Elementor builds the CSS of any page on your site, the plugin changes that form back to a bare ampersand in an image URL. Nothing else in the CSS changes. Eldrafto pages also store each URL with a bare ampersand.

One Eldrafto account for each site

A WordPress site can be connected to one Eldrafto account at a time. Each connection stores a new token in the plugin, and every token that the plugin stored before stops working. To stop all access by Eldrafto, open Settings -> Eldrafto and click “Revoke all”. Then revoke the Eldrafto application password on your WordPress profile page.

External service (required reading)

This plugin requires an account on the Eldrafto service (https://eldrafto.com) and does nothing on its own. The article content is generated on Eldrafto’s servers, not on your site.

What the plugin sends out: when you configure an API Callback URL in the settings, the plugin sends post-status changes and Elementor activation/upgrade state to that URL so your Eldrafto dashboard stays in sync. Each callback is signed with the shared secret token; nothing is sent until your site is connected to Eldrafto.

What the plugin receives: article titles, body text, layout structure, and image references that the Eldrafto service generates for you, delivered over the authenticated REST endpoints.

The plugin only ever contacts the callback URL in its settings. Eldrafto sets it when it connects your site, and you can change it on the settings page. The plugin does not phone home to any other server.

  • Service: https://eldrafto.com
  • Terms of Service: https://eldrafto.com/terms
  • Privacy Policy: https://eldrafto.com/privacy

The Eldrafto service may be a paid subscription. See https://eldrafto.com for current plans and terms.

Installation

  1. Install and activate the plugin through the WordPress “Plugins” screen, or upload the eldrafto folder to /wp-content/plugins/.
  2. In your Eldrafto dashboard (https://eldrafto.com), connect the site with the user name and an application password of a WordPress administrator. Eldrafto then stores its secret token in the plugin for you.
  3. Only when Eldrafto asks you to, go to Settings -> Eldrafto in WordPress and paste the token that Eldrafto shows. (The API Callback URL is normally filled in automatically when Eldrafto first contacts your site; you can also set it here.)
  4. Optionally, choose the System User used for editor “Take Over” handovers.
  5. Create content from your Eldrafto dashboard; drafts appear under Posts for review (manual mode) or are published automatically (auto mode).

Elementor (free or Pro) is recommended for full layout support but is not required; without it, content is published as Gutenberg blocks.

FAQ

Do I need an Eldrafto account?

Yes. This plugin is a receiver for the Eldrafto content service. Without an active account at https://eldrafto.com it has nothing to publish.

What data leaves my site?

Only callbacks, signed with your secret token, sent to the API Callback URL in the settings. Nothing is sent until your site is connected.

  • A post status change sends the post ID, the old and the new status, the time, the post link and the site address.
  • An Elementor change sends the site address, the time, and the WordPress, plugin and Elementor versions. It also sends whether Elementor is active, Free or Pro, and the Elementor settings that change the layout.

The plugin also stores an Install ID for your site: a random ID and the site address. Eldrafto reads it, with your token or as an administrator, to keep one Eldrafto account for each site. It holds no personal data, and it stays when you delete the plugin, so that a reinstall keeps the same ID. The callbacks do not send it.

When you import a template in Eldrafto, the service asks your site, with your secret token, for the titles of the posts, pages and Elementor templates that have Elementor data. Then it asks for the Elementor data of the one you pick.

The service also reads the site information, with your secret token: the site address, the WordPress, plugin and Elementor versions, the Elementor settings that change the layout, the Install ID and the login URL. It uses the login URL for its “Open in WordPress” links, also when a security plugin hides the login page.

Does it require Elementor?

No. Elementor (free or Pro) unlocks full container layouts. If Elementor is not active, content is published as standard Gutenberg blocks.

Is the service free?

The plugin is free and GPL-licensed. The Eldrafto service it connects to may require a paid subscription; see https://eldrafto.com.

How is the connection secured?

The REST requests from the service carry a secret token that must match the one that the plugin stores (compared in constant time). Three routes use other checks. The token push and the Install ID route need a WordPress administrator. The revoke route can only remove the token that the caller sends. The public health route gives only the plugin version, the Elementor state and the site language. The settings page never shows the token. All outbound callbacks are signed with an HMAC-SHA256 signature derived from that same token.

Changelog

1.11.1

  • Fix: on an Eldrafto page with the Elementor sections layout, the content of a band now starts at the width of your Elementor kit (“Content Width”), as on a container layout. Before, it started up to 50px nearer the edge of the screen.
  • Fix: on an Eldrafto page with the Elementor sections layout, the part of a card that grows (for example the feature list of a pricing card) takes the free height, so the button sits at the bottom of the card, as on a container layout.
  • The width fix adds a small inline style to Eldrafto pages only. The card fix adds a small inline style to each page, and it acts only on the cards that Eldrafto marks with the CSS classes eldrafto-card and eldrafto-grow. Other content does not change.

1.11.0

  • One Eldrafto account for each site. Each time Eldrafto connects your site, its new token replaces every token that the plugin stored before. A token from an earlier version stays valid until that connection, a token paste or “Revoke all”.
  • A new route lets Eldrafto remove its token from the plugin when you disconnect the site.
  • The settings page does not show the token any more. It shows whether a token is stored. You can paste a new token there when Eldrafto asks you to, or click “Revoke all” to remove every token.
  • The plugin makes an Install ID for your site, and gives it to Eldrafto or to a WordPress administrator. A copy of the site at a new address gets a new ID. The ID stays when you delete the plugin.
  • Fix: the plugin sends the post status and the Elementor state to Eldrafto on a site that Eldrafto connected for you. Before, it did not send them.
  • Fix: on an Eldrafto page whose direction is not the site direction, the arrow keys of the tabs and the nested accordion now follow the page. An example is a Hebrew page on an English-language site. Before, the Right Arrow key moved the focus to the left.

1.10.3

  • When you import a template in Eldrafto and the Elementor data of the post is damaged, the plugin now sends a clear code. Eldrafto then tells you at once that the page data on WordPress is damaged. Before, the service tried the import three times, and then showed a general error with a Retry button that did not help.

1.10.2

  • Fix: the icon of an accordion or a toggle stays on its side after a save in the Elementor editor. Before, an administrator in a language of the other direction could move it. An example is an English administrator on a Hebrew site. Eldrafto now stores the side as “start” or “end”, and the plugin adds the CSS for these values.
  • In the Elementor panel, the icon alignment of the accordion and the toggle has two buttons: Start and End. They follow the direction of the page, and a save cannot move the icon.
  • When an Eldrafto page does not set the icon side of an accordion or a toggle, the icon now shows at the start of the line. Before, its side followed the site language and not the page language.
  • A page that you published before 1.10.2 gets this fix when Eldrafto publishes it again, for example after you ask for a revision.
  • Elementor itself has no CSS for “start” and “end”. If you deactivate Eldrafto, these icons show at the start of the line.

1.10.1

  • Fix: a background image whose URL has an ampersand in its query string shows again, on the page and in the Elementor editor. When the URL was stored in its HTML-encoded form, Elementor dropped the whole background image rule. On Elementor 4.1.x, 1.10.0 caused this. On Elementor 4.2 and later, it happened before 1.10.0.
  • Eldrafto now stores a bare ampersand in each URL of a page that it publishes. This applies to the URLs of images and links. For an image URL that is already stored in the HTML-encoded form, the plugin gives Elementor the bare ampersand when Elementor builds the CSS of any page on the site.
  • For a page that you published before 1.10.1, go to Elementor > Tools and click “Clear Files & Data”. The Elementor editor shows the background image of such a page after Eldrafto publishes it again.

1.10.0

  • Security: when Eldrafto publishes a page, the plugin now removes unsafe HTML (for example a script or an onerror attribute) from every text value of the page. Before, it cleaned only the main text fields, so a script in an accordion, toggle, tabs or icon list item could reach the page on Elementor 4.1.x. Elementor 4.2 and later already cleaned these values, so on those versions nothing changes.
  • On Elementor 4.1.x, Eldrafto pages now store the same data as on Elementor 4.2 and later. A bare ampersand in a URL is stored in its HTML-encoded form, and HTML that WordPress does not allow in a post is removed. This applies only to pages that Eldrafto publishes, and you cannot turn it off.

1.9.0

  • A page can mix AI content and your own content (IPTC compositeSynthetic). When the Eldrafto service sends no usable label text for such a page, the plugin now shows “Contains AI-generated content” instead of “AI-generated”.
  • When you import a template in Eldrafto, the list now shows your posts, pages and Elementor templates that have Elementor data. It shows the newest change first, and “Load more” gets the next items. Before, it showed only posts, at most 100, and it also showed posts with no Elementor data. The service needs 1.9.0 or later for this list.
  • Internal: the plugin now sends a code when an import cannot read a post. This applies when Elementor is not active, the post does not exist, or the post has no Elementor data. Eldrafto shows the same messages as before.

1.8.0

  • A page from an Eldrafto template in a right-to-left language (Hebrew, Arabic) now shows right to left on a site in any language. Before, such a page on an English-language site showed left to right, with the price cards and the list marks on the wrong side. A left-to-right page on a right-to-left site now shows left to right. The theme header and footer and the “AI-generated” label stay in the site direction.
  • The page content now tells the browser its language, for screen readers and for the translation and spelling tools of the browser.
  • The left and right alignment of a page is now the same in each site language.
  • A page that an earlier version published does not change. To get these fixes, Eldrafto must publish it again, for example after you ask for a revision. A save in WordPress or in Elementor does not apply them.
  • To publish pages in the site direction, return false from the new eldrafto_content_direction_enabled filter. The language mark stays. A page that Eldrafto published before you added the filter keeps its direction until Eldrafto publishes it again.
  • The Eldrafto service now learns the fonts that Elementor applies on the site. Before, it read only the saved fonts, and a site that never saved its fonts reported none. When “Disable Default Fonts” is on, the plugin reports no fonts, because Elementor then applies none. The plugin also reports when these fonts are the Elementor defaults.
  • On a page from an Eldrafto template, the plugin no longer writes the “custom attributes” setting, which only Elementor Pro reads.

1.7.0

  • The plugin now tells the Eldrafto service the correct page layout of a site that started on an older Elementor. Elementor keeps Containers off on a site that was first installed before Elementor 3.16, also after the site updates to Elementor 4, unless somebody turns them on. Before, the plugin reported Containers as on for every site on Elementor 4, and such a site could get a page that it does not show correctly. The plugin now reads the first installed Elementor version, as Elementor does.
  • The plugin also reports whether the Elementor V4 elements are on, and the first installed Elementor version. The service does not use them yet.
  • When an update of a published page fails, the page now keeps its earlier signed “AI-generated” statement. Before, the plugin had already saved the new statement, so the old page content could carry a statement that was signed for other content.
  • When the plugin cannot remove a draft that a failed publish left, it now tells the service which draft it is, so the service can delete it or record it for a later clean-up.

1.6.0

  • A publish now fails when the plugin cannot store the page’s signed “AI-generated” statement. Before, the plugin dropped a statement that failed its checks, and the page went live with no machine-readable mark. The plugin now checks and saves the statement before it creates, changes or publishes the page. If the statement does not save, the page stays as it was. The plugin confirms each saved statement in its answer to the service.
  • The Eldrafto service needs 1.6.0 or later. Before each publish it asks the plugin whether it can confirm a saved statement, and refuses an older plugin before it changes anything.
  • On a right-to-left page that Eldrafto published (for example in Hebrew), the icon of each Elementor icon-list item now has its gap on the side next to the text.
  • A page that Eldrafto publishes from a full-page template can now hide the theme’s post title, so that the page has one main heading. This applies to Elementor container layouts. Eldrafto sets this Elementor page setting again each time it updates the page, and keeps your other page settings.