Hoobert – AI Command Bar for WooCommerce

By Anurag Bhandari

0+ active installationsVersion 0.3.0

Run your whole store from one prompt. Press Cmd/Ctrl-K, type what you want in plain English, and Hoobert does it in WooCommerce.

Description

You know the click path. Orders, filter by status, find the order, scroll, Refund, line item, quantity, amount, Refund manually, confirm. Six screens to do one small thing.

Hoobert is a command bar for that. Press Cmd/Ctrl-K anywhere in wp-admin to open the WordPress command palette, pick Ask Hoobert, and type the thing you actually wanted:

  • “refund order 1042”
  • “mark this order completed and add a note that the replacement shipped”
  • “create a coupon SUMMER20 for 20% off”
  • “add a Large / Red variation to this product at 54.99”
  • “which products are out of stock”
  • “who were my top customers last month”
  • “approve the pending review on the espresso grinder”

Hoobert reads the request, picks the matching WooCommerce action, shows you what it is about to do, and runs it. That is the whole product. No chat thread to babysit, no second dashboard to learn, no new place your data lives.

He is an owl, and he is careful

Hoobert is meant to be trusted with a live store, so the boring parts got the most attention.

  • Nothing runs until you see it. Every request is resolved into a concrete action first and previewed back to you in plain English. Anything destructive – refunds, deletions, status changes, price and stock edits – needs a confirm click before it touches your data.
  • Your permissions, not the plugin’s. Actions execute in-process through WooCommerce’s own REST API v3, under your logged-in admin session. Hoobert can never do something your own account could not do.
  • No keys in the browser. The inference key, or the shared model’s install token, is stored and used server-side. Your browser never holds a credential, and Hoobert never creates or uses a WooCommerce consumer key/secret pair.
  • Everything is written down. Every executed command is recorded in a store-wide audit log: the request, the exact REST call, the arguments, the outcome, and who ran it.
  • A fixed, small vocabulary. Hoobert ships a set of 28 defined WooCommerce actions. It cannot invent a 29th, run arbitrary code, or reach any part of your site outside that set.

How the language part works

Hoobert is powered by Fern, a family of small, fine-tuned function-calling models from Fernfly. Fern is not a general-purpose chatbot. It does exactly one job: turn a merchant sentence into one of Hoobert’s 28 WooCommerce actions with the arguments filled in. Because the job is narrow, the model is small, and small means fast.

Hoobert works out of the box on Fernfly’s free shared model. When you want more, connect your own Fernfly project. See Connecting a model below.

What it can do

  • Orders – list and search, look one up, change status, refund in full or in part, read and add order notes.
  • Products – list and search, look one up, create, edit, update stock, delete.
  • Variations – list and create variations on a variable product.
  • Coupons – create, list, update.
  • Customers – list and search, look one up, rank by lifetime spend.
  • Reviews – list and moderate.
  • Taxonomy – list and create product categories and tags.
  • Reports – sales over a period, top sellers, top customers.

“This order” just works [coming soon]

Open an order and say “refund this”. Open a product and say “drop the price to 39.99”. Hoobert reads the order or product id off the screen you are on, so you rarely have to type one.

Connecting a model

Hoobert works as soon as it is activated. Out of the box it uses Fernfly’s free shared model: no account, no key, nothing to set up. Each site gets a daily allowance of free requests, currently 50. When a day’s allowance runs out, Hoobert says so and links to a free Fernfly account.

For more requests a day, or a model you can retrain on your own store’s requests, connect your own Fernfly project. It takes a few minutes, and the free tier is enough:

  1. Create a free account at fernfly.com and start a new project. No credit card required.
  2. Choose the WooCommerce template in the new project wizard for a zero-configuration flow. You could also choose the “from scratch” option and import Hoobert’s WooCommerce tool set into the project. It ships with this plugin as tools.json, in the plugin folder.
  3. Train and deploy the project. Fernfly generates the training data; you do not need any ML background.
  4. Under WooCommerce -> Hoobert, choose My own Fernfly endpoint, paste the project’s infer URL and API key, and save.

Once your own endpoint is saved, Hoobert stops using the shared model. You can switch back at any time.

External service

Hoobert sends your typed request to a Fernfly inference endpoint so the model can turn it into a WooCommerce action. This is required for the plugin to function, and it is the only external service it uses.

  • Service: Fernfly – fernfly.com
  • When: only when you run a command from the command bar. Never on page load, on a schedule, or in the background. On the shared model, the first command also registers your site once, to get its install token.
  • What is sent: the text you typed, and the id of the order or product on the screen you are on, so that “this order” resolves. On the shared model, your site’s address (its home URL) goes too, so Fernfly can count the site’s free daily requests. Nothing else. No customer records, no order contents, no site credentials, no analytics, no telemetry.
  • What comes back: the name of one of Hoobert’s 28 actions and its arguments. The action is then run locally, by your own site. The shared model also says how many free requests are left today.
  • Where it goes: by default, Fernfly’s shared endpoint at https://fernfly.com/api/shared/woocommerce. If you connect your own Fernfly project, the endpoint URL you configure instead.
  • Terms of service: fernfly.com/terms-of-service
  • Privacy policy: fernfly.com/privacy-policy

Open source

Hoobert is GPL, all of it, including the front-end sources and the build tooling. Development happens in the open at github.com/antelligent-org/hoobert. Issues and pull requests welcome.

The owl is by agustrisana: Funny owl icons created by agustrisana – Flaticon.

Installation

  1. Install and activate WooCommerce if you have not already. Hoobert will not activate without it.
  2. Install Hoobert from Plugins -> Add New, or upload the plugin folder to /wp-content/plugins/.
  3. Activate it through the Plugins screen.
  4. Press Cmd/Ctrl-K anywhere in wp-admin, start typing, and pick Ask Hoobert. It works straight away on Fernfly’s free shared model.
  5. To use your own Fernfly project instead, go to WooCommerce -> Hoobert. See Connecting a model in the description.

FAQ

Do I need an OpenAI or Anthropic key?

No. Hoobert does not use a general-purpose LLM, and out of the box it needs no key at all. It talks to one Fernfly inference endpoint running a small model fine-tuned on Hoobert’s own WooCommerce actions, and that is the only outside service involved.

Is it free?

The plugin is free and GPL, forever. Out of the box it uses Fernfly’s free shared model, which gives each site a daily allowance of requests, currently 50. When a day’s allowance runs out, Hoobert says so and links to a free Fernfly account, which allows more requests a day on your own project. Every feature works the same on either. There is no locked feature and no trial timer.

Can Hoobert break my store?

It is constrained three ways at once. It can only run one of 28 predefined WooCommerce actions; it runs them under your own admin capabilities, so it cannot exceed what you could do by hand; and anything destructive requires an explicit confirm click after you have seen exactly what will happen. Everything it does run is logged.

That said, a refund is a refund. Read the confirmation before you click it, the same as you would in WooCommerce itself.

What data leaves my site?

Only the sentence you type, plus the order or product id of the screen you are on. On the shared model, your site’s address goes too, so Fernfly can count its daily requests. Nothing is sent unless you run a command. Customer data, order contents, and your credentials never reach the inference endpoint. The model only needs your words to decide which action you meant; the action itself runs locally.

Who can use the command bar?

Only logged-in users with the manage_woocommerce capability, meaning shop managers and administrators. Hoobert’s REST routes enforce this on every request, not just in the UI.

Does it work with my theme or page builder?

Yes. Hoobert lives entirely in wp-admin and does not touch your storefront, your theme, or your front-end at all. Visitors never load a byte of it.

It says my endpoint’s URL or API key is missing. What now?

That only happens when My own Fernfly endpoint is selected under WooCommerce -> Hoobert. Fill in both the inference endpoint URL and the API key, or switch back to the free shared model. If both are set and requests still fail, check that the URL is your project’s full infer route (it ends in /infer) and that the key was copied without surrounding whitespace.

Hoobert misunderstood me.

Rephrase closer to the action you want: “refund order 1042” beats “sort out that customer’s money”. If a request is outside the 28 actions, Hoobert says so rather than guessing. But if you use your own Fernfly project and believe Hoobert got it wrong, head over to Fernfly > Your project > Retrain, find the utterance that it got wrong, correct the function-call JSON in the textbox, save that utterance-function pair, and click the Retrain button. After your model has finished training, Hoobert will start behaving as expected.

Can I add my own actions?

Yes. The tool set is tools.json in the plugin folder: an OpenAI function schema per action, plus a small block describing the REST call to dispatch. Add your entry there, register the matching schema with your own Fernfly project, and retrain. The shared model knows only the 28 actions that ship. The repository README walks through it.

Where is the command history?

WooCommerce -> Hoobert, below the settings, shows every command every admin has run on this store, newest first. The palette itself also has a Hoobert: Query history command showing your own recent ones.

Does it support languages other than English?

The interface is translatable. What the model understands depends on what it was trained on. With your own Fernfly project, a non-English store can train on non-English utterances.

Does it work on multisite?

Yes. Settings and command history are per site, so each store in a network has its own connection and its own audit log. On the shared model, the daily allowance is counted per domain, so sites under one domain in a subdirectory network share it.

Can I try it without installing anything?

Yes. The repository has a WordPress Playground blueprint that spins up a throwaway store in your browser, with WooCommerce, Hoobert, and sample data already set up. It answers on the shared model, so there is no key to enter.

Screenshots

Changelog

0.3.0

Features

  • default to Fernfly’s shared endpoint
  • remove all plugin data on uninstall

Documentation

  • describe the shared endpoint (92ada62), closes #12

0.2.3

Bug Fixes

  • drop the invalid “self” install step from the preview blueprint

Documentation

  • document the manual wordpress.org publish

0.2.2

Bug Fixes

  • enqueue the settings page styles instead of inlining them

0.2.1

Refactors

  • fix prettier issue in eslint config

Documentation

  • add a start-issue skill for github issues
  • add a start-issue skill for github issues
  • instruct claude to work by default in feature branches instead of main

0.2.0

⚠ BREAKING CHANGES

  • the plugin folder and slug are now “hoobert”. Existing installs from a GitHub release will see a separate plugin rather than an upgrade; activating it carries the old settings and history across.

Features

  • add wordpress.org directory assets and their build script
  • document the inference service on the settings page
  • rename the plugin from woobert to hoobert

Bug Fixes

  • build every directory asset from the original owl artwork
  • lower the minimum wordpress version to 6.6
  • only load the command bar for users who can use it
  • stop rendering the saved api key into the settings page

Refactors

  • clear the remaining plugin check findings

Documentation

  • add the plugin directory screenshots
  • add the wordpress.org submission playbook
  • clean up wporg guide
  • correct how wp.org matches the restricted term “woo”
  • fix fernfly create project instruction
  • record compatibility verified across the declared range
  • rewrite readme.txt as the plugin directory listing

0.1.2

Bug Fixes

  • make sample data consistent and refundable

Documentation

  • use the canonical repo owner in the changelog compare link

0.1.1

Features

  • show a plain-English confirmation for write actions
  • require confirmation on product, stock, and coupon updates

Bug Fixes

  • remount the flow modal per query to avoid a stale-result flash
  • hide the write-confirmation message for direct-execute tools

Refactors

  • share one seeder between blueprint and WP-CLI, fix landing redirect

0.1.0

  • Initial release: “Ask Hoobert” command in the WordPress command palette, resolve/execute inference proxy, confirmation for destructive actions.